Product Installation Instructions
Product Parameters
| Specification | Parameters |
| talla | 85*61*30mm |
| weight | 218.5g (With magnet) |
| Built-in battery | 10000mAH（3.7V） |
| Charging voltage | DC 5V/600mA（type-c） |
| Operating temperature | -20°C to+60°C |
| Storage temperature | -20°C to+70°C |
| Sensor | Precision Vibration Sensor |
| Frequency band | FDD:B1/B3/B5/B8FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM/GPRS/EDGE 850/900/1800/1900MH |
| 4G module | SIMCOM-A7670SA |
| GPS | SIMCOM-A7670SA |
| Root Mean Squares Error ( RMSE) | S degrees |
| Dynamic output range | -15~-108dbm |
| Receive sensitivity | -107dbm |
| Maximum frequency deviation | ±0.1ppm |
| Sensitivity | Cold start: -147 dbmHot Start：-155 dbmSearch again: -158 dbmtrack：-160 dbm |
| Positioning accuracy | ＜5m |
| First position time | Cold start: 32 seconds on average |
| LTE 4G antenna | built-in |
| GPS antenna | built-in |
| LED indicator | power, indicating status |
| Transfer Protocol | TCP |
| Power detection | The indicator lights up when the power is on |
| Data upload | Update GPS data in real time and support customization |
| Geo fence | TBD |
| Driving behavior detection | When the vehicle speed exceeds the set speed, the device will upload the over-speed alarm |
| GPS data | Real-time location updates |
| Vibration alarm | Vehicle vibration report in armed state |
Basic Product Functions
| Use | Function | Description |
| GPS tracking and locating | Timing tracking | Reporting positioning information such as latitude and longitude according to the set interval |
| Over-speed alarm | The device will send an alarm to your mobile phone when driving speed is too fast | |
| Geo fence | when the driving range of the car exceeds the set area, an alarm message will be sent to the platform | |
| Historical track | The platform can play back of history driving route, including speed, direction and stay time, etc. | |
| Fleet management | One account can monitor multiple devices, or one device can be monitored by multiple accounts |
Analysis and Troubleshoot of Common Problems
If the yellow light and blue light of this product are always on and do not flash, it means that the device is normal online positioning. In case of flashing, please follow the following steps to analyze and troubleshoot.| Trouble | Analysis | Solution |
| Blue light flashing slowly | Whether to use the device in areas with poor GPS signals, such as near high-rise buildings or underground parking lots | Drive the vehicle to the position with good signal and reinstall the device |
| Whether the front windshield of the vehicle is pasted with metal heat insulation film, which affects the signal reception | If there is a film, use the device in another vehicle to test whether the blue light is always on. If there is no problem in testing on other vehicles without film, it is caused by the film of the vehicle | |
| Whether there are shields or signal jammers on or around the vehicle | If there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device | |
| Blue light flashing quickly | Chip failure | Return to factory for maintenance |
| Yellow light flashing quickly | Whether the SIM card is installed properly | Make sure the SIM card is installed correctly |
| Whether the metal surface of SIM card has dirt or poor connect | Wipe the metal chip surface with a clean cloth or repeatedly insert and remove the card several times | |
| Yellow light flashing slowly | Whether the vehicle is in a place without network, such as an underground parking lot | Please drive the vehicle to a place with good network signal and try to reinstall the device |
| Whether the server platform is normal | Ask background management whether the platform server is working normally | |
| Whether the SIM card status is normal | Check whether the card status is normal through the SIM card query platform | |
| Whether there are shields or signal jammers on or around the vehicle | If there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device |
Product Precautions
- Please pay attention to waterproof of electronic products.
- Please insert the SIM card before installation to ensure that the SIM card has no password, otherwise the device will not work properly.
- The USB port on the terminal device is dedicated for factory testing, and it is not a device charging port. Do not use it for charging or other purposes.
- There must be no substance absorbing electromagnetic wave (such as metal, explosion-proof insulating film) above the installation position.
- Do not touch the devicewith liquid or operate it with wet hands.
- Do not put the deviceinto fire.
- The devicemay not work when the temperature is lower than – 20 ℃ or higher than+60 ℃.
- When the vehicle is in the underground parking lot, tunnel or garage, the positioning signal will be affected. And there may be blind areas of communication network signals, which may cause the deviceto be unable to monitor; When the vehicle drives out of the above area, the device will automatically resume normal operation.
- In case of abnormal conditions, please do not repair by yourself. The manufacturer shall not be liable for any damage caused by connecting non original accessories or unplugging the connections between components.
- This product is an auxiliary product for safe driving, and any loss caused by failure or information loss has nothing to do with our company.
- This product has passed the international CE certification, but because of the complex electromagnetic environment in the vehicle, this product may have electromagnetic interference with the electrical equipmentin some vehicles.
- Do not install or operate this product when the vehicle is running.
- Do not connect the device to uninterruptible power supply without authorization, or it may cause vehicle or product failure. Please consult with a professional about installation.
- Do not shockor throw the product violently, so as to avoid damaging the product, which may lead to malfunction or failure to use.
- The temperature range for normal use of this product is – 20 ℃ to 65 ℃. Exceeding this temperature range may lead to product failure,on fire or explosion.
After-sale Service
1．This product is guaranteed to be replaced for three months and guaranteed for one year from the date of shipment. During the warranty period, if the device is damaged due to non-human factors or product quality, please contact the dealer in a timely manner.2．There is no free repair service for the damage caused by the customer’s unauthorized dismantles or alters or force majeure (such as flood and vehicle accident).
3．After the warranty period expires, the cost of repair materials shall be charged for the product damage and failure caused by use.
4．It provides customers with consulting and technical services such as purchasing, using and installing APP for free.
Valoraciones
No hay valoraciones aún.